Produktinformation
Most buildings have network cabling already installed. You can connect your computer to various serial data devices through your network, with this simple converter.
Large displays, message displays and any other measurement and display devices are ideal candidates for networking.
You can even connect from your PC to a display in another building, another town or another country. This converter uses internet protocol message packeting (IP), which allows it to be used across borders without boundaries.
Screw terminals make installation easy, the configuration procedure is simple and fast.
Example of a connection to one of our message displays.
Applikationer
- Add Ethernet connectivity to any RS232/485 device
- Create a virtual serial port or access via sockets
- Selectable RS485 line termination or biasing
Blockdiagram
Mått
Case width 137,0mm max.
Case height only case 62,0mm, including connectors 98,0mm
Case forward projection 30,0mm
LEM specifications
| Case width | 137.0 mm max |
| Case forward projection | 30.0mm |
| Case height | 62.0 mm case only, 98.0mm including connectors |
| Typical weight | 135 grams |
| Operating conditions | 0 to 50°C |
| Storage conditions | -20 to +70°C |
| Case sealing | IP40 |
| Case Material | Polycarbonate |
| Cable dimensions | Accepts cables up to 1.5mm diameter |
| Flammability Class | V0 (UL94) |
| Power supply | 12 to 30V DC, 2 watts max. |
| Isolation | Ethernet isolated from power and RS232/RS485. RS232 and RS485 ports not isolated from power. |
| Ethernet Connection | Standard base 10/100 RJ45 |
| Serial Data ports | RS232 or RS485, switch selectable. Baud rate set with PC based configuration software. |
