Produktinformation
The new INT-X series of DIN rail transmitters and alarm units offers important time-saving advantages to busy engineers. A hand-held user-friendly programmer lets you set up each unit in site or in the workshop. If you prefer, you can use a PC. Scaled output of 4-20mA, 0-10V, RS485 etc. Whichever setup method you use, you’ll be delighted to see that we designed everything to be easy for you.
You can panel-mount the handheld programmer in a 1/8 DIN standard panel cutout to give local display of the measured variable. The programmer connects to the transmitter with the supplied 2m of colied 4 core cable, or you can make up your own cable to suit your installation.
If you need a simple and reliable way to monitor several different variables, the INT-X series offers an attractive and easily affordable solution. All measurements can be sent to the computer fully scaled in engineering units.
- Simple to install and commission
- Hand held programmer unit option
- PC programming kit option
- Isolated, scalable 4-20mA / 0-10V output
- Isolated RS485 data port as standard
- Detachable screw terminal connectors
- 95-265VAC power supply option
- 11-30 VDC power supply option
- Add-on 4 alarm relay module
- Slim case only 22.5mm wide
Applikationer
Blockdiagram
Mått
INT-X specifications
| Model | Function | Description |
| INT-X-P | Process Signal inputs - scalable Isolated outputs 4-20mA, 0-10V and RS485 | 4-20mA, 1-5V, 0-10V etc. Accuracy 0.1%, +/- 1 count Provides regulated 24V@30mA for 2 wire transmitters. |
| INT-X-L | Loadcells and bridge inputs - scalable Isolated outputs 4-20mA, 0-10V and RS485 | 4 or 6 wire loadcell bridge input. Excitation for up to 4 cells each 350 Ohms, in parallel. |
| INT-X-T | Temperature sensor inputs Isolated outputs 4-20mA, 0-10V and RS485 | Type J, K, T, R, S, B and 3 wire PT100. 0.1° resolution Fully linearised for °C and °F. |
| INT-X-F | Pulse inputs - frequency and total - scalable Isolated output 4-20mA, 0-10V and RS485 | Pulses from encoders, flowmeters, proximity sensors, turbine shafts etc. NPN, PNP, contact closure, 24V pulse. |
| XR4 | Add-on 4 relay alarm unit | End stacked module gives 4 single pole changeover relay outputs. Rated 5A 250 VAC. HI, LO, hysteresis, in-flight. |
| XD | Handheld Programming Kit | Handheld Programmer and cable link. |
| XSOFT | PC Programming kit using RS232 port | Software CD, cable and PC connector. |
