Produktinformation
DIN rail model P12P
The P12P is a versatile single phase monitor
- Single phase power monitor
- Economical and easy to use
- Wide range of useful measurements
- Alarm relay outputs
- Analogue output
- RS485 modbus data output
- Password protection
Applikationer
The P12P is a versatile single phase monitor which can measure, display, retransmit, create alarms and send data corresponding to any of these measurements: (Se fliken “Specifikationer”)
Blockdiagram
Mått
Case width 45mm
Case height 120mm
Forward projections 100mm
Mounting 35mm DIN rail
P12P specifications
| Measurement type | Accuracy |
| RMS AC Voltage | 0.2% |
| RMS AC Current | 0.2% |
| Frequency | 0.1% |
| Active power | 0.5% |
| Active energy | 0.5% |
| Reactive power | 0.5% |
| Reactive energy | 0.5% |
| Apparent power | 0.5% |
| Apparent energy | 0.5% |
| Phase angle | 1% |
| Power factor cos phi | 1% |
| Active to reactive power ratio | 1% |
| Overload | |
| Short term <1 sec | Voltage - 1000, Current = 10x |
| Long term | 120% rated range V and I |
| Analogue output | |
| Isolated, with resolution of 0.025% of range | |
| 4-20mA into a load from 0 to 500 Ohms | |
| 0-5mA into a load resistance of 0 to 2000 Ohms | |
| 0-10V into a load resistance higher than 500 Ohms | |
| The analogue output port should be operated within 50V of ground. | |
| Relay output | |
| 2 relays, volt-free contacts | |
| Voltage rating 250VAC or 150V DC max | |
| Current rating 5A max at 30V DC max or 250 VAC max | |
| Alarm threshold programmable | |
| Alarm type = HI, LO or band with adjustable hysteresis | |
| Alarm annunciation on LCD display | |
| Data output type | |
| RS485 modbus | |
| Baud rate 2400, 4800 or 9600 | |
| Response to query 650mS | |
| ASCII formats 8N1, 7E1, 701 | |
| RTU formats 8N2, 8E1, 801 8N1 | |
| The analogue output port should be operated within 50V of ground | |
| Dimensions | |
| Width | 45mm |
| Height | 120mm |
| Forward projections | 100mm |
| Weight | 300g |
| Sealing | IP40 |
| Mounting | 35mm DIN rail |
| Power | |
| Voltage | 85-253 VAC |
| Consumption | 5VA |
| Warmup time | 15 minutes |
