INT2-AH

Produktinformation

The INT2-AH is a low cost yet highly flexible and easy to use 1/8 DIN scalable AmpereHour or plating charge display.

It includes useful features such as a redosing alarm and pulsed output per unit of charge.

It has a number of useful plug-in options which make it ideal for use in many control and monitoring applications.

Bezel size:	96mm wide x 48mm high. 13mm forward.
Depth behind panel:	125mm including connectors + cable.
Panel cutout:	92mm wide x 45mm high. +1mm, -0mm

Input connections	Separate voltage and current input terminals. Isolated excitation.
Input Signal	0-50mV, 0-60mV, 0-75mV or 0-100mV DC shunt signal
Excitation	none
Digits	6 digits, 14mm high. Legible up to 7 metres away
Digit colour	Red or green
Scaling	Digital menu-free system
Totalized memory	10 years non volatile EEPROM
Front panel controls	Calibration, Tare, Reset, Max/Min, Alarms
Power	11-30VDC or 95-265 VAC
Accuracy	+/-0.05% of range
Thermal stability - range	+/- 50ppm/°C
Thermal stability - offset	+/- 20ppm/°C
Analogue output	Optional plug-in module 4-20mA into 0 to 500 Ohms 0-10V into loads >600 Ohms -5 to+5V into loads >600 Ohms Fully isolated from input and power Fully scalable with digital precision Forward and reversion action possible
Alarm output	Optional plug-in modules 2 Alarms rated 5A 250VAC, SPST 4 Alarms rated 5A 250VAC, SPST Adjustable hysteresis In-flight compensation facility. Energise or de-energise on trip Normally open or closed
Serial data output	Optional plug-in modules. RS232 1200 baud output only. RS422 1200 baud output only. RS485 Addressable DeviceNet Addressable Modbus Addressable Profibus DP Addressable
Logic inputs	TARE, Peak/Valley and RESET
Connectors	Detachable screw terminals
Bezel size	96mm wide x 48mm high. 13mm forward.
Panel cutout	92mm wide x 45mm high. +1mm, -0mm
Depth behind panel	125mm including connectors + cable.
Sealing	IP65 standard, IP67 with optional SPC4 cover

Back to Top