Produktinformation
The INT2-S is a low cost yet highly precise, stable, flexible and easy to use 1/8 DIN Serial data input slave display, and our top seller, for both display-only and display + output applications. It is Ideal for remote weighing applications and to repeat the reading on another display.
Now it can also be mounted inside a panel on DIN rail, as a high-performance signal conditioner, transmitter and alarm module. The front panel buttons can be locked, and there is an optional plain front panel with no buttons, which can be put in place of the standard front, after calibration. If you need to be able to read the display in a reflection, for example in a heads-up display system, you can switch it to display a mirrored image.
Plus
You can now order this display with digits up to 400mm high! Exactly the same well-proven software and hardware, but with digits of 57mm, 102mm, 150mm, 200mm, 300mm or 400mm high. Ideal for large factories, or anywhere where you need to see your important measurements from far away, inside or outside. The large version is known as the Fusion family, sealed IP65 all round. See here.
If you need to be able to read the display in a reflection, for example in a heads-up display system, you can switch it to display a mirrored image.
Applikationer
- Remote weight display
- Sharing measurements with other operators.
- Batch totalizing – can add numeric data strings together
- Serial to analog converter
- Serial to serial converter – complex to simple format
- Serial data compared to preset values to create alarms
Blockdiagram
Mått
INT2-S specifications
| Input connections | Available as UL and cUL listed on request. Open Type, Process Control Equipment, listing number 39CP, File E317722 Produced to IPC 610 Class 2 Standard UL ISO9001:2008 QA CERT. |
| Input Signal | Detachable plug-in screw terminals |
| Input Signal | Accepts RS232 or RS485 input - please specify which you need. Modes ASCII: Displays and ASCII character within the limitations of a 7 segment display. Quant: Displays only numeric ASCII values. Qa.Tot: Quantity totaliser. Can be used to accumulate weight values, for example after each batch. Uses a contact closure to trigger addition. Adjustable parameters Baud rate: 300 to 115200 Data format: 701, 7e1,7n2,801,8e1,8n1,8n2 Termination character: Hex 00 to FF Reject Characters: counted from termination char. |
| Addressing | 00 (wildcard) to F7 |
| Digits | 6 digits, 14mm high. Legible up to 7 metres away. 10 readings per second. Variable brightness from front panel. |
| Digit colour | Red - standard. Green - optional |
| Front panel controls | Configuration, Tare, Reset, Max/Min, Alarms |
| Power | 100-240 VAC std, 11-30VDC option. 10VA Power burden, max. |
| Accuracy | No error, direct copy of input data. |
| Analogue output | Optional plug-in 16 bit module Linearity +/- 0.02% of range 0-20/4-20mA into 0 to 500 Ohms Resolution 0.4uA 0-10V into loads >600 Ohms Resolution 0.2mV -10 to+10V into loads >600 Ohms Resolution 0.4mV Accuracy 0.1% of range Stability 50ppm/C Fully isolated from input and power Fully scalable with digital precision Special features Forward and reverse action possible Can be set to operate from nett or gross value. |
| Alarm output | Optional plug-in relay SPST modules 2 Alarms rated 5A 250VAC, SPST 4 Alarms rated 2A 250VAC, SPST Selectable normally open or normally closed Optional plug-in relay SPDT modules 2 Alarms rated 5A 250VAC, SPDT Optional plug-in solid state modules 2 Alarms rated 50V 100mA DC. Adjustable hysteresis In-flight compensation facility. Energise or de-energise on trip Special features Adjustable timers to set energise and de-energise delays. Can also be set to pulse for applications needing less than 100% duty cycle. In-band and out-of-band alarm function. Manual and automatic in-flight compensation. Can be set to operate from nett or gross value. |
| Serial data output | Optional plug-in modules. RS232 RS485 Addressable On demand or continuous output. Special features Can include time and date with RTC option fitted. Can be set to operate from nett or gross value. |
| Logic inputs | 3 logic inputs, individually configurable for Hold, Reset, Tare, Peak/valley, Nett/Gross, Memory Address Normally open, NPN or contact closure input to activate. 5V open circuit, 1mA switched current. |
| Real time clock option | Accuracy better than 2 minutes per year. Allows date and time to be included in serial data, for example for printing time-stamped records. Automatic summer/winter time correction for Europe and USA Battery backup to maintain timing whilst switched off. Type = CR1620 3V Lithium |
| Environmental | Storage -20 to +70C Operating 0 to 50C Non condensing. Optional IP67 cover SPC4 |
| Connectors | Detachable screw terminals |
| Bezel size | 96mm wide x 48mm high. 13mm forward. |
| Panel cutout | 92mm wide x 45mm high. +1mm, -0mm |
| Depth behind panel | 125mm including connectors + cable. |
| Sealing | IP65 standard, IP67 with optional SPC4 cover |
