Produktinformation
The PICA-40-LP is ideal for installations where a separate power supply would be impractical, such as
in remote water monitoring or weather stations.
10 reasons to choose the PICA range
- Low cost
- Small size
- Loop powered, no external supply
- Wide range of measurements
- Programme-lock function, for security
- Plug-in connectors for quick servicing
- Digital scaling for precision and stability
- Long warranty, extendable free of charge
- Fast, free technical support
- High immunity to interference
Applikationer
- Pressure measurement – use a pressure transmitter sensor
- Level measurement – use a depth or level sensor
- Temperature measurement – use a temperature transmitter
- Humidity measurement – use a humidity transmitter
- Any physical variable having a 4-20mA or 0-10V signal
Blockdiagram
Mått
PICA-40-LP specifications
| Input Signal: | |
| Range | 4-20mA |
| Resolution | 0.01mA |
| Equivalent impedance (max) | 250 Ohms |
| Accuracy at °23C +/-5°C | |
| Max Error | +/-0.1% rdg + 3 digits |
| Temperature coefficient | 100 ppm / °C |
| Warm up | 5 minutes |
| Power supply | |
| Loop power supply | |
| Loop drop (4-20mA) | < 5V |
| Conversion | |
| Technical | Single slope |
| Resolution | 6 bits |
| Rate | 62/ s |
| Display | |
| Range | -1999 to 9999 |
| Type | 4 red digit LEDs 10mm |
| Reading rate | 0.2/s |
| Overflow indication | |
| Environmental | |
| Operating temperature | -10°C to +60°C |
| Storage temperature | -25°C to +85°C |
| Relative humidity | <95% - 40°C |
| Panel sealing | IP65 |
